Introduction
Features
The kit
Options


 

 Introduction

The semiconductor analyser PRODETERMINATOR (AS4002) is an instrument that will be useful in all laboratories and for all electronic hobbyists. Whether for identifying an unknown component or searching for an equivalent, the PRODETERMINATOR is the perfect instrument. Unlike others semiconductor testers, the PRODETERMINATOR displays complete pinout for FET transistors and can determine all static parameters. The instrument can also detect unijunction transistors and can make measurements of opto-couplers parameters.

Top of page

Features

Automatic component identification of:

  Bipolar Transistors
  Darlington Transistors
  Enhancement mode MOSFET Transistors
  Field Effect Transistors
  Triacs
  Thyristors
  Diodes / LEDs
  Unijunction Transistors
  Internal short detection and resistance measurement

 Measured parameters and other features:

  Automatic pinout identification for all the above components
  Gain measurement ( H_FE ) for bipolar transistors
  Test current display (collector or drain current)
  V_BE et I_B measurement
  Detection of Base-Emitter shunt resistor
  Detection of Collector-Emitter diodes
  Measurement of collector leakage current  I_CEO
  Automatic recognition of type for bipolar transistors (Ge/Si)
  Gate threshold voltage measurement ( V_TH ) of MOSFETs
  Measurement of V_TH, I_DSS et R_DSON of JFETs
  Measurement of forward voltage and current of diodes
  Diodes leakage current measurement
  R_BB et ETA measurement of unijunction transistors
  Internal short detection with resistance measurement
  With external module, test opto-couplers and display Current Transfer Ratio, LED current and forward current.
 
 Other features:

  Low battery detection
  Backlit is powered on when a component is identified. It is powered off when the component is removed or after 30s of inactivity.

 Top of page

The kit

The PRODETERMINATOR kit contains all components except the 9V battery. It consists of a professionnal double-sided, through plated printed circuit board with a silk screening to aid in component placement. The components are all professionnal grade, all resistors are 1% precision metal film type. Thanks to the complete printed assembly manual this kit can be easily assembled and is an excellent way to start in electronics.

  Number of electronic parts: 37
  Average construction time: 1h
  Level : beginner

 Top of page

Options

The optionnal enclosure is drilled and punched and comes with a front panel overlay.

Ref: AS4002-01

  Test hooks 
 

Test hooks for opto-couplers

Test board for standard opto-couplers

This cord permits the testing of power transistors. The cord is equiped with professionnal test hooks that ensures a perfect electrical and mechanical contact with the component terminals.

Ref: AS4002-02



 
 

This cord is designed for testing opto-couplers and photointerrupters. The cord is intended to be plugged into the PRODETERMINATOR female input jack.

Ref: AS4002-03


 

This board permits the testing of standard opto-couplers. The kit comes with a single side printed circuit board, all components and the connecting cord.

Ref: AS4002-04

Top of page